HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch JL827A RENEW
vč. ekologické daně a autorského poplatku
Chcete lepší cenu? Poptejte zboží.
HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch JL827A RENEW
The HPE FlexNetwork 5140 EI Switch Series comprises Gigabit Ethernet switches that support static, OSPF and RIP Layer 3 routing, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.
Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers.
High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
HPE FlexNetwork 5140 48G 4SFP+ EI Switch (JL829A) |
||
I/O ports and slots |
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) |
|
4 SFP+ fixed 1000/10000 SFP+ ports |
||
Additional ports and slots |
1 RJ-45 serial console port |
|
Physical characteristics |
Dimensions |
17.32(w) x 9.04(d) x 1.72(h) in (44 x 23 x 4.36 cm) (1U height) |
Weight |
7.72 lb (3.5 kg) |
|
Memory and processor |
512 MB SDRAM, 256 MB flash |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) |
|
Performance |
IPv6 Ready Certified |
|
1000 Mb Latency |
< |
|
10 Gbps Latency |
< |
|
Throughput |
131 Mpps |
|
Routing/Switching capacity |
176 Gbps |
|
Routing table size |
1024 entries |
|
MAC address table size |
16384 entries |
|
Environment |
Operating temperature |
23°F to 113°F (-5°C to 45°C) |
Operating relative humidity |
10% to 90%, noncondensing |
|
Non-operating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
|
Non-operating/Storage relative humidity |
5% to 95%, noncondensing |
|
Acoustic |
Low-speed fan: 42.2 dB, High-speed fan: 49.3 dB |
|
Electrical characteristics |
Frequency |
50/60 Hz |
Maximum heat dissipation |
130/153 BTU/hr (137.15/161.42 kJ/hr), For AC powered units. For DC powered units heat dissipation is 130 BTU/hr min, 171 BTU/hr max |
|
Voltage |
100 - 240 VAC -48 to -60 VDC |
|
Current |
10 A |
|
Maximum power rating |
44 W |
|
Idle power |
38 W |
|
Notes: |
- Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. - Power ratings for AC power indicated above. Current used is 5A Max when DC Power used. For DC input power, idle power is 38W, maximum DC power used is 50W. |
|
Safety |
UL 60950-1 |
|
Emissions |
FCC Part 15 Subpart B CLASS A |
|
Immunity |
Generic |
EN 55024 |
ESD |
EN300 386 |
|
Management |
IMC - Intelligent Management Center |
|
Services |
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
|
HPE FlexNetwork 5140 24G PoE+ 4SFP+ (370W) EI Switch (JL827A ) |
||
I/O ports and slots |
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) with 4 combo ports (RJ-45 or SFP) |
|
Additional ports and slots |
1 RJ-45 serial console port |
|
Physical characteristics |
Dimensions |
17.32(w) x 10.24(d) x 1.72(h) in (44 x 26 x 4.36 cm) (1U height) |
Weight |
17.64 lb (8 kg) |
|
Memory and processor |
512 MB SDRAM, 256 MB flash |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) |
|
Performance |
IPv6 Ready Certified |
|
1000 Mb Latency |
< |
|
10 Gbps Latency |
< |
|
Throughput |
95 Mpps |
|
Routing/Switching capacity |
128 Gbps |
|
Routing table size |
1024 entries |
|
MAC address table size |
16384 entries |
|
Environment |
Operating temperature |
23°F to 113°F (-5°C to 45°C) |
Operating relative humidity |
10% to 90%, noncondensing |
|
Non-operating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
|
Non-operating/Storage relative humidity |
5% to 95%, noncondensing |
|
Acoustic |
Low-speed fan: 44.4 dB, High-speed fan: 53.6 dB |
Electrical characteristics |
Frequency |
50/60 Hz |
|
Maximum heat dissipation |
102/1569 BTU/hr (107.61/1655.29 kJ/hr), for AC Power. For DC Power min heat dissipation is 85 BTU/hr and max heat dissipation is 2695 BTU/hr |
||
Voltage |
100 - 240 VAC, -54 to -57 VDC |
||
Current |
10 A |
||
Maximum power rating |
451 W |
||
Idle power |
30 W |
||
PoE power |
370 W PoE+ |
||
Notes: |
- Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 740 W of PoE+ can be supplied. - Max current rating for DC power is 25A. AC Input power is 30W typical, and 460W max(including 370W PoE+ consumption. DC Input voltage range is -54 to -57VDC. Total DC input power is 25W Typical and 790W with 740W PoE+ Power consumption. DC Input voltage range is -54VDC to -57VDC. DC Input Source is the HPE RPS1600. |
||
Safety |
UL 60950-1 |
||
Emissions |
FCC Part 15 Subpart CLASS A |
||
Immunity |
Generic |
EN 55024 |
|
ESD |
EN300 386 |
||
Management |
IMC - Intelligent Management Center |
||
Services |
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
Models |
|
HPE FlexNetwork 5140 24G POE+2SFP+2XGT EI Switch |
JL823A |
HPE FlexNetwork 5140 48G PoE+ 4SFP+ EI Switch |
JL824A |
HPE FlexNetwork 5140 48G POE+ 2SFP+ 2XGT EI Switch |
JL825A |
HPE FlexNetwork 5140 24G SFP w/8G Combo 4SFP+ EI Switch |
JL826A |
HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch |
JL827A |
HPE FlexNetwork 5140 24G 4SFP+ EI Switch |
JL828A |
HPE FlexNetwork 5140 48G 4SFP+ EI Switch |
JL829A |
HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch |
R8J41A |
HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch |
R8J42A |
Key features |
|
|
|
Standard Features
Software-defined networking
|
Quality of Service (QoS)
Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information
|
Connectivity
Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
|
Resiliency and high availability
Creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router |
Layer 3 routing
An Interior Gateway Protocol (IGP) that uses a link state routing algorithm
Uses a distance vector algorithm with UDP packets for route determination |
Management
Leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login
Uses standard SNMP to monitor essential network functions
Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance
Mirrors ingress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
Monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which prevents network problems such as loops
Provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6
Ingress and egress port monitoring enables network problem-solving
Embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It is made available at no additional cost and offers centralized configuration backup, software version management and seamless switch replacement.
Integrates fault management, element configuration, and network monitoring from a central vantage point
SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618) |
Security
Industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
- Per-user ACLs Permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data - Automatic VLAN assignment Automatically assigns users to the appropriate VLAN based on their identities
Allows secure file transfer to and from the switch
|
Performance
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation |
Device support
|
Convergence
Provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device
Supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings
|
Additional information
Improves energy efficiency through the use of the latest advances in silicon development
Provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes |
Energy Efficient Ethernet (EEE) Support Reduces power consumption in accordance with IEEE 802.3az |
Layer 2 switching
Increase the scalability of an Ethernet network by providing a hierarchical structure
Monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-based networks
|
Layer 3 services
Determines the MAC address of another IP host in the same subnet
Simplifies the management of large IP networks
Allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
|
Warranty and support
See Warranty check for warranty and support information included with your product purchase.
To find software for your product, refer to http://www.hpe.com/networking/support |