TYAN Transport HX 2U 4GPU server 2x SP3, 16x DDR4 ECC R, 8x.3,5 SATA NMVe 2x 1600W (plat.), 2x 10Gb LAN, IPMI

Tyan Transport HX TN83B8251 (B8251T83E8HR-2T-N) Specifications System Form Factor 2U Rackmount Chassis Model TN83 Dimension (D x W x H) 32.71" x 17.25" x 3.43" (831 x 438.4 x 87mm) Motherboard Name S8251GM2NE-2T# Motherboard Notification # The motherboard not sold separately Gross Weight 33.1 kg (73 lbs) Net weight 20.3 kg (44.8 lbs) Front Panel Buttons (1) RST / (1) PWR w/ LED / (1) UID LEDs (1) HDD / (2) LAN / (1) UID / (1) System Event I/O Ports (2) USB 3.1 Gen1 ports External Drive Bay Q'ty / Type (8) 3.5/2.5" Hot-swap SSD/HDDs HDD Backplane Support SAS 12Gb/s /SATA 6Gb/s /NVMe Supported HDD Interface (8) SATA 6Gb/s / NVMe Notification The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. System Cooling Configuration FAN (5) 8cm fans Power Supply Type CRPS Input Range AC 200-240V/12.6A Frequency 47-63 Hz Output Watts 2,200 Watts Efficiency PFC / 80 plus Platinum Redundancy 1+1 Processor Q'ty / Socket Type (2) AMD Socket SP3 Supported CPU Series (2) AMD EPYC™ 7002/7003 Series Processors Configurable Thermal Design Power (cTDP) Wattage Max up to 240W* #Notification 240W CPUs are supported with certain condition. Please contact Tyan Technical Support before purchasing Memory Supported DIMM Qty (8)+(8) DIMM slots DIMM Type / Speed DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 Capacity Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS Memory channel 8 Channels per CPU Memory voltage 1.2V Expansion Slots Pre-installed TYAN Riser Card (PCI-E Gen4) (1) M8251T83-LR32-2L riser card for (1) HH/HL PCI-E Gen4 x16 (right) +(1) HH/HL PCI-E Gen4 x16 (left) slots / (1) M8251T83-L32-2F riser card for (2) FH/FL PCI-E Gen4 x16 / (1) M8251T83-R32-2F riser card for (2) FH/FL PCI-E Gen4 x16 Physical Dimension Abbreviation FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) LAN Q'ty / Port (2) 10GbE ports, (1) GbE port dedicated for IPMI Controller Intel X550-AT2 PHY Realtek RTL8211E Storage SATA Connector (2) SATA-DOM / (8) SATA from (2) Slim SAS (8 ports) Controller Direct from AMD EPYC CPU Speed 6Gb/s RAID N/A NVMe Connector (Slim SAS) (4) SFF-8654 for (8) NVMe ports Graphic Connector type D-Sub 15-pin Resolution Up to 1920x1200 Chipset Aspeed AST2500 I/O Ports USB (2) USB3.1 Gen1 ports (@ rear) / (2) USB3.1 Gen1 ports (via Cable) / (1) USB3.1 Gen1 port (Type-A) COM (1) header ( COM1 ) VGA (1) D-Sub 15-pin port RJ-45 (2) 10GbE ports, (1) dedicated GbE for IPMI SATA (8) SATA from (2) Slim SAS connectors + (2) SATA-DOM connectors TPM (Optional) TPM Support Please refer to our TPM supported list. System Monitoring Chipset Aspeed AST2500 Temperature Monitors temperature for CPU & memory & system environment Voltage Monitors voltage for CPU, memory, chipset & power supply LED Over temperature warning indicator / Fan & PSU fail LED indicator Others Watchdog timer support Server Management Onboard Chipset Onboard Aspeed AST2500 AST2500 iKVM Feature 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub AST2500 IPMI Feature IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface BIOS Brand / ROM size AMI / 32MB Feature Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI 6.1 / ACPI sleeping states S0, S5 / FAN speed control automatic Operating System OS supported list Please refer to our AVL support lists. Regulation FCC (SDoC) Class A CE (DoC) Class A CB/LVD Yes RCM Class A VCCI Class A Operating Environment Operating Temp. 10° C ~ 35° C (50° F~ 95° F) Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F) In/Non-operating Humidity 90%, non-condensing at 35° C RoHS RoHS 6/6 Compliant Yes Package Contains Barebone (1) TN83-B8251 Barebone Manual (1) Quick Installation Guide