Supermicro A+ Server MTR 1U Epyc 7000-Series CPU, 2x 1GbE,Intel I210, 4x HS 3.5'' SATA3 , 4 SAS3 ports, 400W Redundant P

Product SKUs AS -1013S-MTR A+ Server 1013S-MTR Motherboard H11SSL-i Processor/Chipset CPU Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W* Cores Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors) Chipset System on Chip (SoC) System Memory Memory Capacity 8 DIMM slots Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) DIMM Sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 Processors) Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices SATA SATA3 (6 Gbps) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers Intel® I210 Controller VGA ASPEED AST2500 BMC Expansion Slots PCI Express 1 PCI-E 3.0 x16 (FH/HL) slot M.2 Interface: PCI-E 3.0 x4 (NVMe based) Form Factor: 2280, 22110 Key: Onbard M-key Number of M.2: Single Input / Output SATA 4 SATA3 (6 Gbps) ports LAN 2x 1GbE LAN ports 1 RJ45 Dedicated IPMI LAN port USB 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A) 4 USB 2.0 ports (2 rear, 2 via header) VGA 1 VGA port Others 1 COM port (rear) 2 SATA DOM power connector TPM 1.2 header System BIOS BIOS Type AMI 128Mb SPI Flash EEPROM BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1 Chassis Form Factor 1U Model CSE-813MFTQC-R407CB Dimensions Height 1.7" (43mm) Width 17.2" (437mm) Depth 19.85" (503mm) Weight Net Weight: 20 lbs (9.1 kg) Gross Weight: 33 lbs (15.0 kg) Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED Drive Bays Hot-swap 4 hot-swap 3.5" SATA3 drive bays Peripheral Drives Optional Optional 2.5" drive adapter Optional slim DVD drive Backplane HDD Backplane Supports 4 SATA3 3.5" HDD System Cooling Fans 4x 40x28mm 4-pin PWM Cooling Fans Air Shroud 1 Air Shroud AC/DC240V Input Redundant Power Supplies 400W 1U Redundant Power Supplies with PMbus Total Output Power 400W Dimension (W x H x L) 54.5 x 40 x 220 mm Input 100 - 240Vac / 6.0 - 3.0A / 50-60Hz 200 - 240Vdc / 3.4 - 3.2A (CCC Only) +12V Max: 33A / Min: 0.5A +5V sb Max: 3A / Min: 0A Output Type Gold Finger Connector Mating with Molex 45984-4343 Certification Platinum Level Certified Platinum Level Certified [ Test Report ] PC Health Monitoring CPU Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator FAN Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED Other Features Chassis Intrusion Detection Chassis Intrusion Header Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)