SUPERMICRO 1U GPU server 2xE5-2650v4, 16x 32GB DDR4-2400, 240GB S3520, 4x Tesla P100

Product SKUs SYS-1028GQ-TXRT SuperServer 1028GQ-TXRT (Black) Motherboard Super X10DGQ Processor/Cache CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. GPU 4 NVIDIA® Tesla® P100 SXM2 NVIDIA® NVLINK™ up to 80GB/s System Memory Memory Capacity 16x 288-pin DDR4 DIMM slots Up to 1TB† ECC 3DS LRDIMM, 1TB ECC RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 32GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors On-Board Devices Chipset Intel® C612 chipset SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Graphics ASPEED AST2400 BMC Input / Output SATA 6 SATA3 (6Gbps) ports LAN 2 RJ45 10GBase-TEthernet ports 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (2 via headers) Video 1 VGA Connector Serial Port 1 Serial header System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.7.1 UEFI Chassis Form Factor 1U Rackmount Model CSE-118GQP-R2K05B Dimensions and Weight Height 1.7" (43mm) Width 17.2" (437mm) Depth 35.2" (894mm) 39.3" (997mm) with rails Package 24" (H) x 8" (W) x 46" (D) Weight Net Weight: 45 lbs (15.9 kg) Gross Weight: 58 lbs (21.8 kg) Available Color Black Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2 Network activity LEDs System Overheat LED / Fan fail LED / UID LED Expansion Slots PCI-Express 3 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 low-profile slot Drive Bays Hot-swap 2x 2.5" Hot-swap drive bays Fixed 2x 2.5" internal drive bays System Cooling Fans 7x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control Power Supply 2000W Redundant Power Supplies with PMBus Total Output Power 1000W: 100 – 120Vac 1800W: 200 – 220Vac 1980W: 220 – 230Vac 2000W: 230 – 240Vac 2000W: 200 – 240Vac (UL/CUL only) Dimension (W x H x L) 73.5 x 40 x 265 mm Input 100-120Vac / 12.5-9.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) +12V Max: 83.3A / Min: 0A (100-120Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 166.7A / Min: 0A (230-240Vac) Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) 12Vsb Max: 2.1A / Min: 0A Output Type 25 Pairs Gold Finger Connector Certification Titanium Level96% Titanium Level [ Test Report ] PC Health Monitoring CPU Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. 5 Phase-switching voltage regulator FAN Total of seven 4-pin PWM fans 7 fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8 Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED Power Fail / Overheat LED Suspend-state Indicator LED UID LED Other Features SDDC Support Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 30°C (50°F to 86°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)