SUPERMICRO 1U TWIN server2x (2x LGA3647, iC621, 16x DDR4 ECC R, 4x 2,5" SATA3, SIOM LAN, IPMI), 2x 1000W(tit.)

Product SKUs SYS-1029TP-DTR SuperServer 1029TP-DTR (Black) Motherboard (Two per System) Super X11DPT-PS Processor/Cache (per Node) CPU Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, Dual UPI up to 10.4GT/s Support CPU TDP 70-145W (Consult with SYS PM for higher CPU TDP Supports) Cores Up to 28 Cores Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) System Memory (per Node) Memory Capacity 16 DIMM slots Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro On-Board Devices (per Node) Chipset Intel® C621 chipset SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 Network Controllers Barebones and Complete System must have at least one SIOM card installed per node IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Graphics ASPEED AST2500 BMC Input / Output (per Node) SATA 4 SATA3 (6Gbps) ports LAN 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (rear) VGA 1 VGA port Serial Port / Header 1 Fast UART 16550 port / 1 Header (internal) Others 2 SuperDOM support on the motherboard 1 NVMe or 2 SATA M.2 (22x80/60/42 mm) support with option part: AOC-SMG3-2H8M2 M.2 and SuperDOM are for OS boot and they cannot coexist System BIOS BIOS Type AMI 32MB SPI Flash ROM Management Software Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog Power Configurations ACPI Power Management PC Health Monitoring CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors Chassis Form Factor 1U Rackmount Model CSE-809H-R1K05P3 Dimensions and Weight Width 17.2" (437mm) Height 1.7" (88mm) Depth 28.25" (718mm) Package 29.6" (W) x 8" (H) x 38.4" (L) Weight Gross Weight: 48.1 lbs (21.9 kg) Net Weight: 33.5 lbs (15.2 kg) Front Panel Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED Expansion Slots (per Node) PCI-Express 2 PCI-E 3.0 x16 Low-profile slots 1 SIOM card support Note: Barebones and Complete System must bundle with SIOM (With only one CPU installed, SXB2 M.2 and SXB4 riser card slots not function) Drive Bays (per Node) Hot-swap 4 Hot-swap 2.5" SAS3/SATA3 drive bays Backplane SAS3 backplane System Cooling Fans 3 Heavy duty counter rotating fans with air shroud and optimal fan speed control PowerStick Power Supply 1000W 1U Redundant Power Supplies with PMBus Total Output Power 800W: 100 – 127Vac 1000W: 200 – 240Vac Dimension (W x H x L) 38 x 40 x 360 mm Input 100-127Vac / 9-7.5A / 50-60Hz 200-240Vac / 6-5A / 50-60Hz +12V Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) +5Vsb Max: 4A / Min: 0A Output Type Gold Finger Connector (16 Power Pin, 14 Signal Pin) Certification Titanium Level Certified96% Titanium Level [ Test Report ] Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)