SUPERMICRO 1U server 2x LGA3647, iC622, 12x DDR4 ECC R, 10x 2,5 HS(8xSATA+2xSATA NVMe), M.2, 2x750W, 2x10GbE, IPMI, WIO

Product SKUs SYS-1029P-WTRT SuperServer 1029P-WTRT (Black) Motherboard Super X11DDW-NT Processor/Cache CPU Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, Dual UPI up to 10.4GT/s Support CPU TDP 70-165W* Cores Up to 28 Cores Note * Certain high frequency optimized CPUs within 165W TDP are not supported, such as Intel Gold 6144, 6146, 6244, 6246, 6250 and 6256. Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. System Memory Memory Capacity 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM†† Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. On-Board Devices Chipset Intel® C622 chipset SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 Network Controllers Dual LAN with 10Gbase-T from C622 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Video ASPEED AST2500 BMC Input / Output SATA 8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports LAN 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port USB 6 USB 3.0 ports (4 rear, 2 front via header) Video 1 VGA port DOM 2 SuperDOM (Disk on Module) ports System BIOS BIOS Type AMI 32Mb SPI Flash ROM Management Software Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog Power Configurations ACPI / APM Power Management PC Health Monitoring CPU Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator FAN Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment Thermal Control for fan connectors Chassis Form Factor 1U Rackmount Model CSE-116AC2-R706WB2 Dimensions and Weight Width 17.2" (437mm) Height 1.7" (43mm) Depth 23.5" (597mm) Gross Weight 46 lbs (20.9kg) Available Colors Black Front Panel Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED Expansion Slots PCI-Express 2 PCI-E 3.0 x16 (FHHL) slots 1 PCI-E 3.0 x8 (LP) slot 1 PCI-E 3.0 x16 for Add-on-Module (AOM) 1 PCI-E 3.0 x4 NVMe M.2 slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) Drive Bays Hot-swap 8 SATA3 (6Gbps) ports and 2 NVMe/SATA3 hybrid ports (connected to onboard storage controller) Backplane SAS/SATA HDD Backplane System Cooling Fans 4 Counter-rotating 4cm PWM fans, 2 fans for AOC cooling AC/DC240V Input Redundant Power Supply 700W/750W Redundant Power Supplies with PMBus Total Output Power 700W/750W Dimension (W x H x L) 54.5 x 40.25 x 320 mm Input 100 - 140Vac / 8 - 6A / 50-60Hz 200 - 240Vac / 4.5 - 3.8A / 50-60Hz 200 - 240Vdc / 4.5 - 3.8A (CCC Only) +12V Max: 58A / Min: 0.5A (100 - 140Vac) Max: 62A / Min: 0.5A (200 - 240Vac) Max: 62A / Min: 0.5A (200 - 240Vdc) (CB/CCC Only) +5V sb Max: 3A / Min: 0A Output Type Gold Finger Connector Mating with Molex 45984-4343 Certification Platinum Level Certified Platinum Certified [ Test Report ] Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)