SUPERMICRO 1U server 1x LGA1151, C236, 4x DDR4 ECC, 8x 2.5" HS SAS SATA, 340W (80+ Platinum), IPMI

Product SKUs SYS-1019S-MC0T SuperServer 1019S-MC0T (Black) Motherboard Super X11SSH-CTF Processor/Cache CPU Single Socket H4 (LGA 1151) supports: Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processors CPU TDP up to 80W Note BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors System Memory Memory Capacity 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC UDIMM Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs DIMM Sizes 16GB, 8GB, 4GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C236 chipset SATA SATA3 (6 Gbps) via C236 controller RAID 0, 1, 5, 10 SAS Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Dual Intel® X550 10GBase-T LAN ports Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Video ASPEED AST2400 BMC Input / Output SATA 8 SATA3 (6Gbps) ports SAS 8 SAS3 (12Gbps) ports LAN 2 RJ45 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port USB 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 6 USB 2.0 ports (2 rear + 4 headers) Video 1 VGA port Serial Port / Header 2 COM ports (1 rear, 1 header) SuperDOM 2 SuperDOM (Disk on Module) ports with built-in power PC Health Monitoring Voltage Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. FAN Total of 6 fan headers supporting up to 6 fans 4 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED System Information LED Suspend static indicator LED UID/Remote UID Other Features Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Chassis Form Factor 1U Rackmount Model CSE-113MFAC2-341CB Dimensions and Weight Height 1.7" (43mm) Width 17.2" (437mm) Depth 19.98" (507mm) Package 8.5" (H) x 24" (W) x 29.5" (D) Weight Gross Weight: 31 lbs (14.1 kg) Net Weight: 18.5 lbs (8.4 kg) Available Colors Black Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2 Network activity LEDs System Information LED Expansion Slots PCI-E 1 PCI-E 3.0 x8 M.2 1x M.2 Interface: SATA and PCI-E 3.0 x4 Form Factor: 2260 Key: M-Key Double Height Connector Drive Bays Hot-swap 8 Hot-swap 2.5" SAS/SATA3 drive bays Backplane SAS3/SATA HDD Backplane (SAS support requires optional SAS controller) System Cooling Fans 4x 4cm chassis internal fan Optional 2x 40x28mm PWM fan Power Supply 340W AC power supply w/ PFC AC Voltage 100-240 V, 50-60 Hz, 4.2-1.8 Amp +5V Max: 16 Amp / Min: 0.5A +12V Max: 28 Amp / Min: 0.5A +3.3V Max: 15 Amp +5V standby Max: 3 Amp -12V Max: 0.5 Amp Certification Platinum Level Certified Platinum Level System BIOS BIOS Type 8MB SPI Flash EEPROM with AMI BIOS Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)